Graver General Membrane Filter (ZTEC G)
General Description
This pleated, disposable filter element is constructed of
absolute rated, hydrophilic, asymmetric polyethersulfone
membrane with extended filter area to allow for a high
system flow rate.
- 7.0 ft2 (0.65 m2) of membrane surface area per 10" element
– High throughput
– Longer on-line service reduces costly maintenance time - Absolute rated membrane from 0.1 to 0.65 μm
- Manufactured in an ISO Class 7 cleanroom environment
- 100% flushed with 18 MW-cm DI water and gross integrity tested
- Meets USP Class VI biological test for plastics
- Fixed pore construction eliminates dirt unloading as differential pressure increases
- Low extractables
| SPECIFICATIONS | |
|---|---|
| Recommended Change-out D.P. | 2.4 bar |
| Max. D.P. | 4.14 bar @ 27°C |
Max. Operating Temp. | 82 °C |
| Grades | 0.45, 0.5, 1, 3, 5, 10, 20, 40μm |
| Media | Asymmetric Polyethersulfone membrane |
| Hardware | Polypropylene |
| Gasket/O-Rings | Buna-N, EPR, Silicone, Viton, Teflon, Encapsulated Viton O-Rings |